Picture of 57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

Picture of 57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

Picture of 57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

Picture of 57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

Picture of 57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

Picture of 57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

Picture of 57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

Picture of 57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

Picture of 57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

Picture of 57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

57153 Carbide Tipped Sink and Trim with Ultra-Glide Ball Bearing Guide Solid Surface 3/4 Dia x 1 Inch x 10 Deg x 1/2 Shank

Manufacturer: Amana Tools

SKU: 57153

MPN: 57153

To order or inquire about this product, please call one of our sales representative at (800) 736-3524.

Trim a sink cutout flush with the bowl in stages using these "over-hang" and flush trim bits in tandem. The overhang bits are equipped with non-marring Ultra-Glide™ bearings that are tapered to match the slope of the bowl's side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation.

Trim a sink cutout flush with the bowl in stages using these "over-hang" and flush trim bits in tandem. The overhang bits are equipped with non-marring Ultra-Glide™ bearings that are tapered to match the slope of the bowl's side. A first pass with the appropriate overhang bit cleans the cutout edge, leaving a very slight overhang at the underside of the counter. A pass with the flush-trim bit completes the operation.